connektgear 2m UK Mains Power Cable UK Plug to C5 (Cloverleaf) Socket

Connekt Gear IEC C5 UK Mains Power Plug 2m 27-0114B – Full Product Guide

The Connekt Gear IEC C5 UK Mains Power Plug 2m 27-0114B is a replacement or spare mains power cable designed for use with devices that accept an IEC C5 inlet connector. Manufactured by Group Gear under the Connekt Gear brand, this cable bridges a standard UK three-pin mains plug to the IEC C5 cloverleaf socket found on a wide range of consumer and business electronics. With a 2-metre cable length and full compliance to British electrical safety standards, it offers a practical and reliable solution for anyone who needs to replace a lost, damaged, or incompatible power lead.

What Is the IEC C5 Connector?

The IEC C5 connector, often referred to informally as the "Mickey Mouse" or cloverleaf connector due to its distinctive three-lobed shape, is a low-profile power inlet defined by the IEC 60320 international standard. It is rated for up to 2.5 amps at 250 volts and is polarised, meaning it can only be inserted in one orientation. This connector type is widely used on the power bricks and adapters that accompany laptop computers, on portable projectors, and on various small appliances and audio-visual equipment. If your device has a small, rounded triangular socket for its power input rather than the larger rectangular IEC C13 kettle-lead socket, it almost certainly requires an IEC C5 cable such as the Connekt Gear 27-0114B.

Key Features and Specifications

Cable Length and Flexibility

At 2 metres in length, the Connekt Gear IEC C5 UK Mains Power Plug 27-0114B provides enough reach to comfortably connect a device to a wall socket or extension lead without pulling taut. This length is well suited to office desks, conference tables, and home workstations where the nearest power outlet may not be directly adjacent to the device being powered.

UK Mains Plug

The mains plug end of this cable is a standard UK BS 1363 three-pin plug, fused at 5 amps. This is the correct fuse rating for devices drawing up to around 1,150 watts, which comfortably covers the typical power consumption of laptop adapters and projectors. The plug is suitable for use in any standard UK 13-amp wall socket.

BS 1363/A Compliance

This cable is fully compliant with BS 1363/A, the British Standard governing the construction and safety of fused plugs and socket outlets for AC mains supplies. Compliance with this standard provides assurance that the plug and cable have been built to meet defined criteria for insulation, conductor sizing, fuse protection, and mechanical robustness. This is an important consideration when choosing any mains power cable, as non-compliant products can present a fire or electrocution risk.

Flexible Moulded Collar

Both ends of the cable feature a flexible moulded collar where the cable exits the connector housing. This strain-relief collar reduces the mechanical stress placed on the cable at the point where it is most vulnerable to bending and flexing, helping to extend the working life of the cable and reduce the likelihood of internal wire damage caused by repeated movement.

Physical Specifications

• Cable colour: Black
• Cable length: 2 metres
• Connector type: IEC C5 (cloverleaf) to UK BS 1363 three-pin plug
• Fuse rating: 5A
• Weight: 0.21 kg
• Manufacturer: Group Gear
• OEM part number: 27-0114B
• Barcode: 5035624023192

Who Is This Product For?

The Connekt Gear IEC C5 UK Mains Power Plug 2m 27-0114B is suitable for a broad range of users. Home workers and office staff who have misplaced the original power cable for a laptop adapter will find it a straightforward and affordable replacement. IT technicians and support teams who maintain pools of shared laptops or projectors often keep a stock of IEC C5 cables on hand, as they are among the more commonly lost or damaged accessories in shared workspaces.

Educators and AV technicians who regularly set up projectors in classrooms or meeting rooms will also find this cable useful, since portable projectors frequently use the IEC C5 inlet. Anyone who has purchased a second-hand laptop adapter or projector that was supplied without a mains lead will find this cable fills that gap directly.

Because the cable uses a UK plug, it is intended specifically for use in the United Kingdom and other territories that use the BS 1363 socket system. It is not suitable as a direct replacement in mainland European countries, which use the CEE 7 socket family.

Common Uses

• Replacement power lead for laptop power adapters (Dell, HP, Lenovo, Toshiba, Acer, and others that use an external power brick with an IEC C5 inlet)
• Power cable for portable and desktop projectors
• Spare lead for shared office or classroom equipment
• Replacement for worn, frayed, or damaged original cables
• Additional cable to keep at a secondary location such as a home office

Usage Tips

Before purchasing, verify that your device's power adapter or equipment uses an IEC C5 inlet rather than the larger IEC C13 (kettle lead) inlet. The IEC C5 socket is noticeably smaller and has a curved, three-lobed profile. If your device has a rectangular socket with a notch, you require an IEC C13 cable instead.

When routing the cable, avoid sharp bends particularly close to the connectors, and do not run the cable under rugs or carpets where heat cannot dissipate and wear may go unnoticed. Inspect the cable periodically for any signs of damage to the outer insulation, and replace it immediately if any damage is found.

The 5-amp fuse in the UK plug is appropriate for this cable's rated application. Do not replace it with a higher-rated fuse, as doing so would remove the overcurrent protection the fuse is intended to provide.

Buying Advice

The Connekt Gear IEC C5 UK Mains Power Plug 2m 27-0114B represents a competitively priced option in the replacement power cable market. Its BS 1363/A certification provides a meaningful safety benchmark that distinguishes it from unbranded alternatives of uncertain quality. For occasional home use, a single cable is sufficient. Businesses, schools, or organisations managing multiple devices are well served by purchasing several units to maintain availability when cables go missing or fail.

The 2-metre length is a practical choice for most environments. If your setup consistently requires a longer reach, consider whether a short extension lead combined with this cable might be preferable to searching for a longer-format IEC C5 lead, as the standard 2-metre length is the most widely stocked and easiest to replace.

When comparing alternatives, always check that any IEC C5 cable you consider carries a recognised UK safety certification and is sold by a reputable supplier. Electrical cables that fail safety standards can present serious risks, and the small cost difference between a certified and an uncertified cable is not worth the potential hazard.

Frequently Asked Questions

What devices use an IEC C5 connector?

The IEC C5 connector is most commonly found on the external power bricks used by laptop computers, on portable and desktop projectors, and on some audio equipment and small appliances. The socket on the device or adapter is a small, rounded triangular shape with three curved slots arranged in a cloverleaf pattern. If you are unsure whether your device uses an IEC C5 inlet, compare it against a reference image of the IEC C5 socket before ordering.

Is the Connekt Gear 27-0114B safe to use?

Yes. The Connekt Gear IEC C5 UK Mains Power Plug 2m 27-0114B is compliant with the BS 1363/A standard, which is the relevant British Standard for mains plugs and cables in the UK. The cable includes a 5-amp fuse in the UK plug as required by the standard, providing overcurrent protection for the connected device and wiring.

Will this cable work with my laptop?

This cable connects to the power adapter (the external power brick), not directly to the laptop itself. If your laptop's power adapter has an IEC C5 inlet socket on its body, this cable will fit. Many laptop adapters from Dell, HP, Toshiba, Lenovo, and Acer use this inlet. However, some adapters use the larger IEC C13 inlet, or have a permanently attached mains cable, so it is worth checking your specific adapter before purchasing.

Can I use this cable outside the UK?

This cable is fitted with a UK BS 1363 three-pin plug and is intended for use in UK mains sockets only. It is not directly compatible with sockets in mainland Europe, North America, or other regions without the use of a travel adapter. For use abroad, you would need a different cable with the appropriate regional plug, or a suitable plug adapter.

What is the difference between IEC C5 and IEC C7?

The IEC C5 is a three-pin, polarised connector rated at 2.5 amps, while the IEC C7 is a two-pin, figure-of-eight shaped connector also rated at 2.5 amps. The IEC C5 provides an earth connection, which is important for devices that require earthing for safety. The IEC C7 is used on smaller, double-insulated devices such as laptop chargers and some audio equipment that do not require an earth connection. These two connectors are not interchangeable.

What is the cable's maximum power rating?

The IEC C5 connector is rated for up to 2.5 amps at 250 volts, equating to a maximum of 625 watts. The UK plug fitted to this cable is fused at 5 amps, though the limiting factor is the IEC C5 connector's own rating. This is well within the power requirements of typical laptop adapters and projectors, which generally draw far less than 625 watts.